Plumbing
-
TANK LEVER FOR AMERICAN STANDARD* (191073)
Fits Cadet & Plebe
Chrome handle
ABS construction
4″ engineered arm, styrene spud and nutITEM # QTY. 191073 1/10 -
TANK LEVERS ASSEMBLY FOR MANSFIELD* (192036)
Used with Mansfield “water saver” flush valves
ITEM # QTY. 192036 1/100 -
TANK LEVERS BRASS ARM METAL HANDLE (29262)
TANK LEVERS BRASS ARM
METAL HANDLEITEM # DESC. INNER BULK WEIGHT 29262 4 1/2″ BRASS ARM 1 200 41.8 -
TANK TO BOWL GASKETS – SPONGE RUBBER (29068)
Fits most drains
ITEM # DESC. INNER BULK WEIGHT 29068 UNIVERSAL FIT 1 100 15.4 -
TANK TO BOWL KIT 15 PIECE KIT (29066)
Brass tank to bowl bolt set
W sponge tank to bowl gasket
Complete kit baggedITEM # DESC. INNER BULK WEIGHT 29066 15 PIECE KIT 1 50 16.5 -
TANK TO BOWL KIT (29065)
Brass tank to bowl bolt set
W sponge tank to bowl gasket
Complete kit baggedITEM # DESC. INNER BULK WEIGHT 29065 15 PIECE KIT 1 50 17.6 -
TANK-TO-BOWL BOLTS (180066)
For older style two piece units
Complete kit
Always use Genuine Kohler partsITEM # MFG. QTY. 180066 K-GP52050 1/5 -
TANK-TO-BOWL GASKET (180093)
Sponge rubber
3- 34″ OD x 2″ ID
34″ highITEM # MFG. QTY. 180093 K-GP83888 1/3 -
TANK-TO-BOWL KIT FOR AMERICAN STANDARD* (192230)
Tank to bowl repair kit for American Standard
Includes solid brass close coupled tank bolts, nuts, washers and a tank to bowl gasket
PRICE PER PAIRITEM # QTY. 192230 1/25 -
TANK-TO-BOWL WASHER FOR KOHLER* (191026)
Hard rubber
ITEM # QTY. 191026 1/250 -
TANK-TO-BOWL WASHER FOR KOHLER* (191045)
Set of 9 double beveled washers
ITEM # QTY. 191045 1/12 -
TANKLESS ULTRA LOW-NOX CONDENSING WATER HEATER – INDOOR (NATURAL)
“Indoor model includes a built-in temperature controller and advanced diagnostics to simplify troubleshooting.
• Factory-installed power cord included
• Electronic ignition – no pilot light
• Easy-link up to 4 units (GT-540 models only)
• Multi-link up to 20 units (GT-540 models only)
• Comples with lead free standards
• Safety features:
• Air-fuel ratio (AFR) sensor
• Exhaust and water temperature safety control
• Internal freeze protection system
• Power direct vent design
• 3″” PVC venting up to 70 feet
• 4″” PVC venting up to 100 feet
• Canadian installations require ULCS636 listed PVC or CPVC pipe for venting
• Category IV stainless steel venting can also be used
15 YEAR LIMITED RESIDENTIAL HEAT EXCHANGER WARRANTY , 5 YEAR LIMITED PARTS WARRANTY”ITEM # NATURAL -
TANKLESS WATER HEATER CONCENTRIC PVC HORIZONTAL TERMINATION (478903)
3 in venting for intake
3 in venting for exhaust
One termination
Professional finish
Professional installation
Easy to install
Cap with bird screen
For terminating horizontal onlyITEM # MFG # DIAMETER QTY. 478903 VK3-H-PVC 3″ 1 -
TANKLESS WATER HEATER REMOTE CONTROLLER (478056)
For use with Noritz tankless water heaters
Allows you to change the output temperature setting with the touch of a button
Includes 6′ cordITEM # MFG # QTY. 478056 RC-7649M 1/20 -
TASTE/ODOR & SEDIMENT CARTRIDGE (131091)
Modified carbon block cartridge
Removes sediment, reduces chlorine taste and odor
2-micron rating (nominal), 1 GPM flow rate
Average filter life 600 gallons
(3 months average filter life)
4-78″L x 2-1/2″ diameterITEM # MFG. QTY. 131091 PRO-10 1/16 -
TASTE/ODOR & SEDIMENT CARTRIDGE (131008)
Carbon wrapped filter cartridge
Removes sediment, reduces chlorine taste and odor
5-micron rating (nominal), 5 GPM flow rate
Average filter life – 15,000 gallons – (3 months)
9-34″L x 2-1/2″ diameter
Fits #131080 (sold separately)
Cartridges are interchangeable in most standard size housings
May be used for whole house or undersinkITEM # MFG. DESC. QTY. 131008 TO1-DS12-05 PAIR 1/12 -
TASTE/ODOR & SEDIMENT CARTRIDGE (131061)
Granular activated undersink cartridge
Removes sediment, reduces chlorine taste and odor
9-34″ high
20-micron rating (nominal), 1 GPM flow rate
Average filter life – 2,000 gallons (6 months)
Fits housing #131080 (sold separately)ITEM # MFG. QTY. 131061 GAC1 1/6 -
TASTE/ODOR & SEDIMENT CARTRIDGE (131071)
Carbon wrapped, pleated cartridge
Removes sediment
Reduces chlorine taste and odor
2-micron rating (nominal), 5 GPM flow rate
Average filter life – 15,000 gallons (3 months)
9-34″L x 4-1/2″ diameter
Fits #131070 (sold separately)ITEM # MFG. QTY. 131071 T06 1/2 -
TECHNO-FLANGE(TM) ABS CLOSET FLANGE (173387)
“• One-piece knockout will not fall down drain line
• Molded-in test cap prevents damage during construction
• Beveled hub allows for easier insertion into 4″” pipe
• Fits over 3″” or inside 4″” Sch. 40 DWV pipe”ITEM # SIZE PKG. QTY. 173387 3″ x 4″ BULK 1/40 -
TECHNO-FLANGE(TM) PVC CLOSET FLANGE WITH KNOCKOUT (173386)
“• One-piece knockout will not fall down drain line
• Molded-in test cap prevents damage during construction
• Beveled hub allows for easier insertion into 4″” pipe
• Fits over 3″” or inside 4″” Sch. 40 DWV pipe”ITEM # SIZE PKG. QTY. 173386 3″ x 4″ BULK 40 -
TECHNO-FLANGE(TM) PVC CLOSET FLANGE WITH KNOCKOUT (173388)
“• One-piece knockout will not fall down drain line
• Molded-in test cap prevents damage during construction
• Beveled hub allows for easier insertion into 4″” pipe
• Fits over 3″” or inside 4″” Sch. 40 DWV pipe
• Adjustable stainless steel ring”ITEM # SIZE PKG. QTY. 173388 3″ x 4″ BULK 1/40 -
TECHNO-FLANGE™ ABS CLOSET FLANGE WITH ADJUSTABLE METAL RING (173389)
“• Adjustable stainless steel ring
• One-piece knockout will not fall down drain line
• Molded-in test cap prevents damage during construction
• Beveled hub allows for easier insertion into 4″” pipe
• Fits over 3″” or inside 4″” Sch. 40 DWV pipe”ITEM # SIZE PKG. QTY. 173389 3″ x 4″ BULK 1/40 -
TEE HANDLE FOR HOSE BIBB (262156)
12 Broach Round
ORDER IN MULTIPLES SHOWNITEM # QTY. 262156 10/100 -
ITEM # MFG # QTY. 292965 556002 1 -
TEMPERATURE AND PRESSURE RELIEF VALVE (292979)
For hot water supply systems fully automatic pressure & temperature relief protection for domestic, hot water supply tanks & heaters based on the latest American Standard Z2122 listing requirements for temperature discharge capacity
Available with extension thermostat for installation in hot water outlet or a short thermostat for installation directly in available tank tapings
Bronze body construction, non-mechanical seat-to-disc alignment that will not stock or freeze
Temperature relief 210 F
Features a unique thermostat with special thermobonded (non-metallic) protective coating
This feature forms a highly protective dielectric barrier which isolates the copper thermostat from the heater water to prevent accumulations of mineral deposits and galvanic corrosive actionITEM # MFG # QTY. 292979 556016 1 -
BLACK RUBBER PLUNGER (8323)
5- 1/2″
Solid wood handle
ProfessionalstyleITEM # PKG. QTY. 8323 BULK 1/12 -
“SPECIFICATION” BASKET STRAINER ASSEMBLY (122354)
For sinks with 3-1/2″ openings, stainless steel, extra-deep design
Complete with locknut, coupling nut, washers and basketITEM # PKG. QTY. 122354 BOX 1/50 -
BRASS 90° elbow (100-2)
“WARNING: DO NOT USE THIS PRODUCT WITH WATER SYSTEMS THAT CONVEY OR DISPENSE WATER FOR HUMAN CONSUMPTION”
ORDER IN MULTIPLES SHOWN.ITEM # SIZE QTY. 100-2 18″ 10/100 -
“TECH” WIDESPREAD TWO-HANDLE GOOSEneck FAUCET (561240LF)
6″ to 1/2″ adjustable center, two-handle connected
Gooseneck spout
Heavy-duty institutional TUF-TECK(TM) stem mountings, brass spout & trim
With 2.0 GPM flow rate aerator
Color indexed 4″ metal wristblade handles with vandal-resistant screws
Grid strainer drain
Triple chrome-platedITEM # MFG. COLOR/FINISH QTY. 561240LF 23C644 CHROME 1 -
2-FUNCTION WATER-SAVING SHOWERHEAD (194111)
Handheld
20 GPM
Full spray with push button pause control to reduce flow to a trickle
Includes rub clean nozzles to remove mineral deposits
White finish
LIFETIME WARRANTYITEM # MFG. DESC. PKG. QTY. 194111 59462-WHB20-PK 2.0 GPM BOX 1/6
Showing 2611–2640 of 4424 results




